2 Solenoid Valve Range Features & Benefits Worldwide Approvals ATEX Equipment Design & Build Worldwide Approvals. Registered Solenoid Housing is Free to Rotate 60º Solenoid housing is free to rotate 60º allowing for an easy cable layout and ease of connection wiring. Solenoid internals rotate with housing and prevent cables being pulled out of terminal block. Widest range of override options (Auto Reset, Spring Return Manual Override, Stayput Manual Override, Manual Reset, Tamperproof Manual Latch, Latch Energised). Widest Range of Override s Worldwide technical and fi eld support. Solenoid valve can be mounted in any orientation to simplify installation. Valve can be Mounted in any Orientation Commissioning and Maintenance Benefits Spacious Enclosure for Ease of Wiring Terminal Block Surge Suppression Diode E d (dc) Tropicalised solenoid design - all stainless steel construction including magnetic parts.
![]()
Direct and Indirect Acting Solenoid Valves Models FP06P, FP10P, FP12P, BXS & SPR: Ex d, Ex emb, Ex ia: Download PDF Brochure: 250 bar: 8 lpm: SVP8x08 Series: Ex d: Download PDF Brochure: 690 bar: 1 lpm: Direct Acting Solenoid Valves Model FP01: EExd, EExme, EExia: Download PDF Brochure: 690 bar: 15 lpm: Inirect Acting Solenoid Valves Model. Solenoid Valve, 316 Stainless Steel, 1/4 NPT Ports, 3 Way 2 Position, Direct Acting, Normally Universal, Ex d, 24VDC, 3.5W, Auto Reset, 1/2 NPT Cable Entry, Cv 0.50. Bifold, Bifold Marshalsea & Bifold Orange are all brands of Rotork. Registered No. 06186844 in England Registered Office: Rotork House.
Fully encapsulated coil. Spacious solenoid enclosure for ease of wiring. No time penalty for heat dissipation before removing solenoid cover. No special high temperature cable requirements. Internal Earth Connection ISO 900:008.
Functional test certifi cate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 0. 3 Solenoid Valve Range Features & Benefits SIL certified, FMEA, etensive qualification testing coupled with 00% Computerised Diagnostic Test Procedures. Safety and Environmental Benefits SIL third party certifi ed to IEC 6508, FMEA, etensive qualification testing (valve models FP0P, FP06P & FP0P. Note: FP0P fi tted as the pilot stage operator on SJ06, S06/S09/S & SPR). Balanced valve with high safety factors to de-energise at all pressures in Normally Open and Normally Closed confi gurations. 00% computerised diagnostic testing to ensure each solenoid valve is proven along with confi rmed safety factors. Bifold has state of the art testing and qualifi cation equipment including endurance, environment, climatic, performance, function and leakage testing.
State of the Art Testing The solenoid design incorporates an armature plate coil holder mechanism which ensures the valve will operate in damp conditions and reducing the risk of corrosion to internal components. Other solenoid valve designs incorporate a solenoid core tube design that will only operate in dry air conditions! Tolerant to moist air in control lines. Genuine and proven arctic service low temperature performance. Products are manufactured, inspected, assembled and tested in our state of the art production facilities.
Simple Maintenance Large clearances, metal back up to seals and no knife edge sealing to prevent long term valve sticking. Dry armature to prevent armature corrosion affecting safe shut down. Simple maintenance - Removable transient suppression diode and solenoid coil without removing valve from the tubing. Functional test certificate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 04 Solenoid Valve Range Selection Table DIRECT ACTING SOLENOID VALVES - PREFERRED RANGE Product FP0P FP0P Manual Reset Schematic Representation SCHEMATIC / NC SCHEMATIC / NC R Page Number 4 4 Product Code FP0P-0-NC-V-74A-4D-6-XX FP0P-0-NC-V-77A9-4D-0-XX FP0P-0-NC-V-78A9-70-XX Product Description 8' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Auto Reset. ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb.6 Watt, Cv 0., 0 bar. ATEX II GD, E d IIC T6 IECE E d IIC T6.0 Watts, Cv 0., 0 bar.
![]()
ATEX II I GD, E ia IIC T6 Ga IECE E ia IIC T6 Ga 70 Ohms, Cv 0., 0 bar. 8' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Manual Reset.
ATEX II GDc, E emb IIC T Gb FP0P-0-NC-V-74A-4D-ML-6-XX IECE E emb IIC T Gb.6 Watt, Cv 0., 0 bar. ATEX II GD, E d IIC T6 FP0P-0-NC-V-77A9-4D-ML-0-XX IECE E d IIC T6.0 Watt, Cv 0., 0 bar. ATEX II I GD, E ia IIC T6 Ga FP0P-0-NC-V-78A9-4D-ML-70-XX IECE E ia IIC T6 Ga 70 Ohms, Cv 0., 0 bar.
![]()
¼' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Auto Reset. FP06P SCHEMATIC / NU 5 ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb FP06P-S-04-NU-V-74A-4D-44-XX 4.4 Watt, Cv 0.5, 0 bar. FP06P-S-04-NU-V-74A-4D-68-XX 6.8 Watt, Cv 0.75, 0 bar. ATEX II GD, E d IIC T6 IECE E d IIC T6 FP06P-S-04-NU-V-77A9-4D-5-XX.5 Watt, Cv 0.5, 0 bar. FP06P-S-04-NU-V-77A9-4D-57-XX 5.7 Watt, Cv 0.75, 0 bar. ¼' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Manual Reset. SCHEMATIC / NU R 5 ATEX II GDc, E emb IIC T Gb FP06P-S-04-NU-V-74A9-4D-ML-6-XX IECE E emb IIC T Gb.6 Watt, Cv 0.75, 0 bar.
FP06P Manual Reset ATEX II GD, E d IIC T6 FP06P-S-04-NU-V-77A9-4D-ML-0-XX IECE E d IIC T6.0 Watt, Cv 0.75, 0 bar. Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system. 4 ISO 900:008.
Functional test certifi cate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 0. 5 Solenoid Valve Range Selection Table DIRECT ACTING SOLENOID VALVES - PREFERRED RANGE Product Schematic Representation Page Number Product Code Product Description ¼' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Auto Reset. FP0P SCHEMATIC / NU 6 FP0P-SI-04-NU-V-74A-4D-44-XX FP0P-SI-04-NU-V-74A-4D-68-XX ATEX II GDc, E emb IIC T IECE E emb IIC T Gb 4.4 Watt, Cv 0.5, 0 bar. 6.8 Watt, Cv 0.75, 0 bar. ATEX II GD, E d IIC T6 IECE E d IIC T6 FP0P-SI-04-NU-V-77A9-4D-5-XX.5 Watt, Cv 0.5, 0 bar. FP0P-SI-04-NU-V-77A9-4D-57-XX 5.7 Watt, Cv 0.75, 0 bar. ¼' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Manual Reset.
SCHEMATIC / NU R 6 ATEX II GDc, E emb IIC T FP0P-SI-04-NU-V-74A9-4D-ML-6-XX IECE E emb IIC T Gb.6 Watt, Cv 0.75, 0 bar. FP0P Manual Reset ATEX II GD, E d IIC T6 FP0P-SI-0-NU-V-77A9-4D-ML-0-XX IECE E d IIC T6.0 Watt, Cv 0.75, 0 bar. SCHEMATIC / NU ½' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Auto Reset.
FPP 7 FPP-S-08-NU-V-77A9-4D-0-XX ATEX II GD, E d IIC T6 IECE E d IIC T6 Watt, Cv.5, 0 bar. SCHEMATIC / NU R ½' NPT Ports, way position, direct acting, Normally Universal, 4Vdc, Manual Reset. FPP Manual Reset 7 FPP-S-08-NU-V-74A9-4D-ML-65-XX ATEX II GD, E d IIC T6 IECE E d IIC T6 6.5 Watt, Cv.5, 0 bar. Functional test certificate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 0 56 Solenoid Valve Range Selection Table INDIRECT ACTING SOLENOID VALVES - PREFERRED RANGE Product Schematic Representation Page Number Product Code Product Description ¼' NPT Ports, way position, pilot operated, Normally Closed, 4Vdc, Auto Reset. SCHEMATIC / NC T SJ06-EI-NC-00-74A-4D-6-XX ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb.6 Watt, Cv 0.7, 0 bar. 8 SJ06-EI-NC-00-77A9-4D-0-XX ATEX II GD, E d IIC T6 IECE E d IIC T6.0 Watt, Cv 0.7, 0 bar.
SJ06 SJ06-EI-NC-00-78A9-70-XX ATEX II I GD, E ia IIC T6 Ga IECE E ia IIC T6 Ga 70 Ohms, Cv 0.7, 0 bar. ¼' NPT Ports, way position, pilot operated, Normally Closed 4Vdc, Manual Reset. SCHEMATIC / NC T R ATEX II GDc, E emb IIC T Gb SJ06-E5-NC-00-74A-4D-ML-6-XX IECE E emb IIC T Gb.6 Watt, Cv 0.7, 0 bar. 8 SJ06-E5-NC-00-77A9-4D-ML-0-XX ATEX II GD, E d IIC T6 IECE E d IIC T6.0 Watt, Cv 0.7, 0 bar. SJ06 Manual Reset SJ06-E5-NC-00-78A9-70-ML-XX ATEX II I GD, E ia IIC T6 Ga IECE E ia IIC T6 Ga 70 Ohms, Cv 0.7, 0 bar. ½' NPT Ports, way position, pilot operated, Normally Closed, 4Vdc, Auto Reset. SCHEMATIC / NC T S-E-NC-00-74A-4D-6-XX ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb.6 Watt, Cv.7, 0 bar.
S 9 S-E-NC-00-77A9-4D-0-XX S-E-NC-00-78A9-70-XX ATEX II GD, E d IIC T6 IECE E d IIC T6.0 Watt, Cv.7, 0 bar. ATEX II I GD, E ia IIC T6 Ga IECE E ia IIC T6 Ga 70 Ohms, Cv.7, 0 bar. Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system. 6 ISO 900:008.
Functional test certifi cate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 07 Solenoid Valve Range Selection Table INDIRECT ACTING SOLENOID VALVES - PREFERRED RANGE Product Schematic Representation Page Number Product Code Product Description ½' NPT Ports, way position, pilot operated, Normally Closed, 4Vdc, Manual Reset. SCHEMATIC / NC T R S-E5-NC-00-74A-4D-ML-6-XX ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb.6 Watt, Cv.7, 0 bar. S Manual Reset 9 ATEX II GD, E d IIC T6 S-E5-NC-00-77A9-4D-ML-0-XX IECE E d IIC T6.0 Watt, Cv.7, 0 bar. ATEX II I GD, E ia IIC T6 Ga S-E5-NC-00-78A9-70-ML-XX IECE E ia IIC T6 Ga 70 Ohms, Cv.7, 0 bar.
½' NPT Ports, way position, pilot operated, Normally Closed 4Vdc, Auto Reset. SCHEMATIC / NC T SPR-E-NC-00-74A-4D-6-XX ATEX II GDc, E emb IIC T Gb IECE E emb IIC T Gb.6 Watt, Cv.0, 0 bar. SPR 0 SPR-E-NC-00-77A9-4D-0-XX SPR-E-NC-00-78A9-70-XX ATEX II GD, E d IIC T6 IECE E d IIC T6.0 Watt, Cv.0, 0 bar. ATEX II I GD, E ia IIC T6 Ga IECE E ia IIC T6 Ga 70 Ohms, Cv.0, 0 bar. ½' NPT Ports, way position, pilot operated, Normally Closed, 4Vdc, Manual Reset. SCHEMATIC / NC T R ATEX II GDc, E emb IIC T Gb SPR-E5-NC-00-74A9-4D-ML-6-XX IECE E emb IIC T Gb.6 Watt, Cv.0, 0 bar.
SPR Manual Reset 0 ATEX II GD, E d IIC T6 SPR-E5-NC-00-77A9-4D-ML-0-XX IECE E d IIC T6.0 Watt, Cv.0, 0 bar. ATEX II I GD, E ia IIC T6 Ga SPR-E5-NC-00-78A9-70-ML-XX IECE E ia IIC T6 Ga 70 Ohms, Cv.0, 0 bar. Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system. Functional test certificate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 0 7.
8 Solenoid Valve Range Overview Materials of Construction Solenoid housing and valve manufactured from 6L stainless steel as standard. Valve seals are supplied in Viton as standard. Alternative elastomers available for etreme conditions and to suit media.
Springs are manufactured from 0S6 & 6S4 stainless steel as standard. Fasteners are metric A4 8/0 grade stainless steel; equivalent to 6 grade stainless steel. Technical Data Operating Performance for FP0P, FP06P, FP0P, FPP, SJ06, S06/S09/S & SPR Duty cycle 00% continuously rated/energised. Surge suppression diode is fi tted on all E d dc solenoid coils as standard.
Response times - pull in. 21 Accessory Information s Product s The range of products displayed in this brochure, are designed to accommodate all the options shown below. If the style or arrangement required for your application is not shown, please contact our office with full description and specification details. Type M - Electrical to Switch or Temporary Manual Override Manual Override Type M The solenoid valve switches on and off with the electrical supply. The manual override button can be pressed to operate the valve when the solenoid is in the electrically de-energised position. The manual override is non-detented, i.e. Does not latch in position.
When the button is released, the valve spring returns. Type MOR - Electrical to Switch or Temporary Manual Rotary Override Manual Rotary Override Type MOR The solenoid valve switches on and off with the electrical supply. The manual override rotary operator can be turned to operate the valve when the solenoid is in the electrically de-energised position.
The manual override is detented, i.e. Does latch in position. Type ML - Electrical and Manual Required to Switch or Temporary Manual Override Type MLT - As above - Tamperproof Manual Reset Type ML & MLT For Types ML and MLT, apply the electrical signal and press the reset button. With type ML, the valve moves to the energised position and will not de-energise until the electrical supply is removed. The manual reset button also acts as a manual override, when the valve is in the de-energised position and the electrical supply is off. The manual reset is non-detented, spring return, i.e. Does not latch in position.
With type MLT, the valve cannot be moved to the energised position by pressing the button if there is no electrical supply to the solenoid. Type LE - Latched Energised (NO/NC Only) Latch Energised Type LE Designed specifically for Deluge systems. The solenoid valve can be used in the electrically de-energised condition. When an electrical signal is applied to the valve, the valve shifts to the energised position and stays in this position, even if the electrical signal is removed, and until the valve is manually moved back to the de-energised position by pressing the reset button. The valve can only be manually reset after the electrical signal is removed.
The reset button is fitted at the base of the valve. Functional test certificate, letter of total traceability are available on request, to BSEN B BFD5 Jan Bifold 0.
.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands.See our brands. Bifold solenoid valves are an extremely high-quality range of stainless steel solenoid valves that are designed with reliability and longevity in mind. Bifold solenoid valves are renowned for performing exceptionally well in highly demanding applications within the oil and gas, offshore, chemical and refinery industries and are available for use in various hazardous locations.At MGA Controls, we supply the solenoid valve FP06P/FP10P series, available in both stainless steel and aluminium construction. Read on to find out more about our full Bifold solenoid valve catalogue. MGA Controls is an official Bifold solenoid valve supplier, boasting extensive experience in their product range.
As leading control and instrumentation suppliers, we are proud to deliver high-quality products and services to the industry. We liaise closely with our customers to deliver the right solutions to meet their business needs.For more information on the Bifold solenoid valve FP06P/FP10P series, or to talk to one of our experienced technical sales team members, please call on 80 or email us at. The Bifold solenoid valve FP06P is a 3/2-way direct acting solenoid poppet valve that is manufactured in the UK to the highest standards.
Designed for use within highly demanding applications in extreme and hazardous environments, the FP06P is a valve to be reckoned with. Bifold solenoid valves have become associated with offshore oil and gas applications, but can also be used onshore, particularly in coastal environments where a fully stainless-steel construction is beneficial.The Bifold FP06P’s main features include:. Standard stainless steel or aluminium construction.
¼” NPT connections. Auto reset or manual override.
010 bar operating pressure. Viton or fluorosilicate seat material. Ex d protection class. 24v DC voltage. NAMUR mounting. BSP end connections. 2-way 2-position valve configuration.
Universal configuration.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |